Search results

So after looking at my dead truck for over a year I'm ready to put it back on the road. Looking for a good running drop in ready motor. Located in moreno vally ca. Hopefully air fish has one laying around or someone local.

2003 single cab, pulled out the air bag switch, computer and mirrors lifted it off the frame and that's it. Everything is there minus what I just said took off. Cab has a few minor scratches but other than that paint is good no fading or peeling and a few minor dings from rocks on the lower pass...

What does a fully dressed 7.3 weigh minus front accessories? Getting ready to pull mine and don't know if my hoist and stand is rated for em Fat fingered from the phone- Corey

So I have been thinking about putting a new piston and rings in my #5 dead hole. only getting about 100 psi out of it during a compression test but I can pressured the cylinder to almost 300 with my co2 tank so im thinking its a cracked or got a hole. What would be the best way to go about this...

Early 99 super cab short bed. Lost compression in #5. power seats locks and windows. Body has a few dents and scratches trans was rebuilt 2k ago. 3 tires are around 70% and one around 90. 212k on the odometer. Make an offer. Truck is in Moreno valley Ca. Fat fingered from the phone- Corey

So its been about six months and im tired of looking at my truck sittin. Last time I touched it I found out I had 100 psi in cylinder 5. So is there any other things I can check or test to see if its something simple because I don't really have the coin to blow on the truck with a baby due in...

Im looking for a 7.3 preferably 99-00 and ready to drop in. Send me a Pm if you got something.

#5 Fat fingered from the phone- Corey

Well I fixed my door locks and the inevitable happened. There's something else to fix now. The trucks always been temperamental when cold with a random miss. Sometimes fire up no problem, sometimes it smokes like hell and sometimes id fire it up and all is well and 2 mins later the puff is back...

Anyone pull a few springs out of the rear leafs? I already pulled the over load between the axel and leaf and now im considering pulling another one or two out to bring the rear down? Fat fingered from the phone-Corey

Well just like says I am at the point of considering a swap for a fresh engine which would happen at the end of the year but theres some planning needed. Im most likely going to just buy a fresh 7.3 long block with the possibility of adding twins but still bouncing around between that and...

I need a passenger side manual telescoping tow mirror but if you got a pair i would be happy to take em of your hands. Old man clipped a wall on a job site and shattered his so now im without one till i get him one. Parking on the street sucks..........

Not my add but figured it was worth showing http://www.ebay.com/itm/Ford-Super-Duty-F250-F350-Snow-Plow-Package-Coil-Springs-/300625699868?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AF-250+Super+Duty&vxp=mtr&hash=item45feb0241c#ht_500wt_1191

Who uses it and what brand?

So I have been hanging on for a while looking for a chip and I found one which happens to be a dp F5 for a good deal and lucky enough its within driving distance and its already programmed for a e99 ca auto truck. My question is who's running dp tunes and are their any complaints w/ the F5 chip...

So i got to thinking earlier about all the truck thefts and a little light bulb lit. So i had some free time so i thought i would give it a shot. So basically i put a relay inline with the starter signal wire as close to the firewall as i could and i spliced the cigaret lighter power wire and...

So my truck seems to one up me every time I fix something. Trans was just rebuilt about six months ago and worked fine. Had my pcm reflashed by ford when I took the truck back to the shop because the mechanic recommended it and the shift into 3rd and 4th was kinda firm but now under heavy...

So i have some free time and im gonna be fabing up some duals just have not decided on goin 4 or 5in. What you guys think?

I know this is a long shot but im looking for some stock good E99 injectors. Trouble shooting my injector issue and would like another set to swap into the truck. Fat fingered from the phone-Corey

My airbag switch's bulb burnt out and i was wondering if a switch from a wrecked truck would work or if there was a sensor integrated in the switch. Not looking to have my air bag pop as soon as i plug it in.