Search results

Well last fall after doing some heavy towing over about 1,500 miles I decided it was time to upgrade the HPOP since the truck didn't seem to happy going up any decent grades. Decided to go with an Adrenalin HPOP, swapped it out and towed the same load another 100 miles or so. It seemed like an...

Its about time for another set of tires and I think I know which direction I want to go but I'm not totally sure yet. I have a couple choices, first I was thinking about staying with the same tire size. Possibly switching to a different brand/style of tire, but sticking with the 285/75/16. My...

I have for sale a South Bend 3250 dual disk clutch out from behind my 7.3. This clutch is rated to hold 650HP/1200ft. lbs. The clutch was working perfectly when it was removed and is less than a year old. This clutch has maybe 1200 street driven miles on it, no drag racing or sled pulling. All...

Alright, tomorrow I will be getting a PCS stand alone transmission controller to control the 4r100 behind my 7.3. I have an idea of what I'm in for as far as installation goes, so I've been researching some of the areas that will need to be wired up. I know I'm going to need a hot and a ground...

I have a 4x4 ZF6 with a manual transfer case out from behind a 7.3 that I need to get rid of to make room for an auto. The transmission is currently in the truck with the anticipation to be pulled sometime this month. Shifts and holds every gear fine, and has about 150,000 miles on it. I also...

Figured its time to start a thread on this since I'm starting to make some forward progress on this project. My ZF6 is being taken out of my truck to get replaced with a BTS 4R100. I will be controlling the trans. with a PCS. I haven't decided whether or not I'm going to swap the input shaft in...

They look like these On edit: if a mod could put this in the tire/wheel section, or WTB section I'd appreciate it.

Well since there isn't a Fabrication section around here I figured I would throw this in here. Its not truck related but I enjoy seeing some of the off topic "projects" in here on an occasion, so I thought some of you might like to see what my brother and I put together over the last few days...

As the title states, good working 97 manual transfer case out from behind an E4OD. I'm not really sure what they're worth, so I'll start with $350 Located in Flushing, MI

I wanted to see what kind of input I could get on here before I took the time to get a hold of BTS and bug them with my questions. I've recently purchased an E4OD BTS from a 97 powerstroke, this will be going in my 99 with a PCS. I've talked to a few about bolting the trans in as an E4OD and...

Switching to a 4r100 in the near future. I'll be getting rid of my 4x4 ZF6 and 3250 South Bend dual disk clutch. I will be keeping my transfer case, the trans. has about 170k on it and shifts great. The clutch is brand new, I put it in the week before last and it probably has 200 miles on it...

What's everyone putting in their ZF6 these days for fluid, and how many quarts? Same stuff in the transfer case? For some reason I remember reading that most were running Motocraft ATF.

I'm looking for a 99+ crew cab superduty with a good body. Prefer 4x4 but I'll look at 2wd's to, long or short box. I'd like to find one with no engine or a bad/ blown engine if possible. Looking to spend $4000 or less. Let me know what's out there.

I've got a buddy with an 04' 6.0. For the most part the truck is stock, it only has guages, and a separate fuel system for his veggie oil. Let me start out by saying this condition he is experiencing is not relevant to the fuel he's running, it's happening running on diesel to. While cruising...

In need of a 4x4 ZF6 and a manual shift transfer case (273 t case I believe). Let me know if you've got anything!

Just as the title says, looking for a good working DAC3 PCM.

Great shape nothing wrong with them, just missing the plugs for the power. Make an offer.

These are power, extending tow mirrors in great shape. No fadding or cracks, and they still have the plugs on them. There are two really small holes on the bottom of each mirror base where the arm connects to the base, that I had wire running through. There is also a small spot on the top arm...

Are we going to have regional sections for local get togethers, and other B.S. that's not nation wide event related?

Version #2. Gotta start this section out the right way! Post up pictures of what you haul around. I'll start out.