Search results

I'm having an ongoing issue with my race truck. I bought a used transmission and converter, trans is supposed to have 500 miles on a rebuild and about 1300 miles on the hard parts. Its continually hitting the rev limiter on the 2-3 shift. After multiple tune revisions last year it started...

My what's are higher than I'd like them while towing, pretty easy to hit 1300. I've had a heavy tow tune built by Warren and gear head but they both still do the same thing. I pulled a small enclosed, probably 5,000lbs and was pretty much 1050+ running 65-70 on the interstate. Mods are in my...

I've been working on my towing tune with Bill from php. This past weekend, pulling about 4000 it ran good, but the engine fan wouldn't fully kick in. Got home and pulled codes and had a p2199 and a p1335. I checked both iat sensors with my laptop this morning and iat1 was showing 72* after...

I'm looking for a decent nut insert tool, I'd like to find a kit if possible but not a must. All of them I seem to find are cheap and have horrible reviews.

Found one leaking so I want to replace both. I found a good write up but can't find any torque specs. Does anyone have any links to the torque specs and reinstallation procedure? On an 05 srw

Need 4wd coil buckets and the track bar mount at the frame for an 07 250.

Bought an 07 rclb for a play truck and the power door locks don't work. I've got power to both switches. Checked the actuator on the driver's side tonight and there are 4 wires going to it. I've got power on 2 of them when I press the unlock/ lock button, yes they alternate which one has power...

For any of you in or around western NC. Shadyside Dragway 2149 Honey Haven Farm Road Shelby, NC 28152 www.shadysidedragway.com

Alright guys I looked and couldn't find much about it. My grandpas 96 has a fuel leak in the valley somewhere, I figure I might as well replace what I can while I'm in there. I saw the master boring kit on riffraff's site but what else should I replace? I saw rubber hoses, but aren't sure...

I found the but on my pinion loose the other night, so I put loc-tite on it and tightened it back up. Now I have a slight whine. Not sure how long it was loose, so thinking about having it pulled apart to replace the crush sleeve. What would you guys do? Thinking about a truetrac and possibly...

I'm looking to upgrade the wiring from my alternators. Im also looking at upgrading and adding a few grounds. Wondering what you guys are using for fuses from the alternators and if your upgrading the connections at the battery's?

The front hubs on my 05 have developed a mind of their own. So here are my questions, any special grease I need to lube them a little? Or will any high temp bearing grease work? Any links or tips for doing this? And how do I check the hub bearings to make sure their not messed up? Sorry for all...

Alright guys i've seen the subject come up before so i thought i would add to it. All mods in sig, running srl extreme (full fuel at wot), ran a 8.02 at 84, not to mention the flawless performance on the street!

Anyone seen this for may 15-17? http://www.charlottemotorspeedway.com/documents/thumbnails/2014%20Dragway%20On%20Track%20Schedule_page_1_800x600.png

I'm having idling issues on my truck right now. I had a transmission put in it a couple weeks ago, got it back put my new tunes in it and it started missing while idling. Emailed Eric he adjusted the tune and its better but still misses at idle and sometimes in gear. I tried my old tune for the...

Alright guys my grandpa has a 96 with 154,XXX on it with a superchip. Its idling rough, as in it will lope for a few seconds then almost smooth completely out then go back to loping and just do this continually, he said it would shut down randomly when idling but start right back up. I pulled...

well i started tearing my truck down today for the installation of my new apex manifold and blow off valve and found oil puddled in the hot side pipe. i've got a powermax turbo thats been on for 2 years and might have 25,000 miles on it. Is there just an oring in there that needs replaced or...

Im putting a set of components in my truck and plan on mounting the tweeters on the sail panels. My question is do i need to angle them to the center of the truck? Or at the front seats? Or where?

just wondering if you could post up some info on your 5r110's? whats upgraded on the internals and what converter it would come with if they do.

What is everyone using to help protect their chrome wheels? Always heard use wax but wasn't sure if there was something better.