Taylor D
New member
Hey JD what's your estimate on hp I should be at with this setup. I know the tranny is a factor but will happen soon.
Sent from my SM-G900P using Tapatalk
6.4 RCLB DD/Tow Rig Build
- Thread starter Taylor D
- Start date
Hey JD what's your estimate on hp I should be at with this setup. I know the tranny is a factor but will happen soon.
Sent from my SM-G900P using Tapatalk
Taylor D
New member
Just want to give a big thanks to Marty at Marty's Diesel and Morgan at Midwest for alot of help lately with parts and many questions answered after hours by both.
My dual fuelers well be here tomorrow and should get alot done on the truck tomorrow.
Sent from my SM-G900P using Tapatalk
My dual fuelers well be here tomorrow and should get alot done on the truck tomorrow.
Sent from my SM-G900P using Tapatalk
Taylor D
New member
Made lots of progress yesterday on the truck. Here's some pictures. Morgan's dual fueler kit looks great and went together easily.
Sent from my SM-G900P using Tapatalk
Sent from my SM-G900P using Tapatalk
Taylor D
New member
Also got the tranny converted from job 1 with external filter to job 3 with internal filter and mag hytec deep pan and ran the new job 3 cooler lines from the tranny to the front to hook to the cooler.
Sent from my SM-G900P using Tapatalk
Sent from my SM-G900P using Tapatalk
Taylor D
New member
This afternoon I also took advice from Ryans thread and welded the rear axle tubes.
Sent from my SM-G900P using Tapatalk
Sent from my SM-G900P using Tapatalk
- Joined
- May 22, 2011
- Messages
- 15,240
- Reaction score
- 1
good man. whats the turbo and fuel setup so i dont have to scroll ?
Taylor D
New member
Elite 76mm with a 59mm 11 blade rcd and 30 percent nozzles and Morgan's dual fuelers with Marty's diesel a-1000 lp setup
Sent from my SM-G900P using Tapatalk
- Joined
- May 22, 2011
- Messages
- 15,240
- Reaction score
- 1
id say close to 750+.
RSK
Active member
I'm super envious of your new setup, and your shop or garage your working on it in. I bet having the cab up and space to work on it, really makes everything pretty easy to do. that truck should really be fast when you drop the hammer especially being a regular cab!
Taylor D
New member
Taylor D
New member
Thanks can't wait to drive it and yes very fortunate to have a shop it makes it nice to work on it right at home. It's the hangout for me and my buddies when there's a project to be done.
Sent from my SM-G900P using Tapatalk
Morgan@Midwest Diesel & Auto
New member
Looks awesome! Great progress, now get it running so we can see a burnout vid!
Taylor D
New member
Thanks can't wait to but gotta go easy on tranny till I get it built soon
Sent from my SM-G900P using Tapatalk
Taylor D
New member
Cab going back on Thursday
Sent from my SM-G900P using Tapatalk
Taylor D
New member
Waiting on different wastegate setup from Rudy's gonna install that tomorrow night and install cab on Thursday.
Also did a DC Power Engineering 250 amp alternator and Trevor at PMF is sending me his long arm 4 link setup that will be put on next week can't wait.
Sent from my SM-G900P using Tapatalk
Also did a DC Power Engineering 250 amp alternator and Trevor at PMF is sending me his long arm 4 link setup that will be put on next week can't wait.
Sent from my SM-G900P using Tapatalk
Just keeps gettin better. I know I said it before, but I love the way you did Marty's kit!!!
Taylor D
New member
Thanks buddy it has been a fun and great learning experience
Sent from my SM-G900P using Tapatalk
jdgleason
Active member
Is it running?!
Taylor D
New member
Hope to put cab on tomorrow didn't have time last week
Sent from my SM-G900P using Tapatalk
Taylor D
New member
I got it running. Feels good to hear it run just wanting on tuning from larz at gearhead. Spoke with him and sent files earlier today so he can build the tunes. Can't wait to drive it. Got some things to button up should be back to dd status by this time next week.
Sent from my SM-G900P using Tapatalk
Sent from my SM-G900P using Tapatalk
