Somd_6.4
Member
- Joined
- Feb 21, 2016
- Messages
- 105
- Reaction score
- 0
This is my first post on here and with a new build in the process I figured I'd post up a thread. the truck is a 08 ccsb, the setup on the truck last year was a 72atmo/stock vgt, 60hp nozzles, dual pumps, suncoast built trans, caltracs, rudys fuel bowl ******, airdog, with ******** tuning. Fastest pass with that setup was a 12.01 at 111, but the truck pushed coolant almost every pass.
So that brings us to this year, the truck came apart a couple weeks ago and found that I had a couple bent valves along with a blown gasket. So the plan for the new setup will consist of a 472 with 60% over nozzles, along with pushrods and valve springs. I would like to see this setup get me to 11.50s or so on fuel before it gets sprayed.
I will also post some pics up of the truck and old setup, as well as the new one as I get them.
So that brings us to this year, the truck came apart a couple weeks ago and found that I had a couple bent valves along with a blown gasket. So the plan for the new setup will consist of a 472 with 60% over nozzles, along with pushrods and valve springs. I would like to see this setup get me to 11.50s or so on fuel before it gets sprayed.
I will also post some pics up of the truck and old setup, as well as the new one as I get them.
Last edited: