super duty picture thread:

[Coxey Diesel]

Super pumped on this if it works.... gonna try to shove some 33's under a stock 2wd

Why not just level it?

 

[83f350]

I don't see why it wouldn't my buddy has 33's under his stock height 2wd 24v 2nd gen. rubs a little but slight trimming will fix it

 

[Josh@DirtyDiesels]

Why not just level it?

Because it's gonna look so BRO with those big tires stuffed in there. Plus leveling these is apparently a nightmare with alignment and all that

 

[farmall99]

33's shouldn't be an issue..

I actually want to drop the rear to level.

 

[sootie]

Super pumped on this if it works.... gonna try to shove some 33's under a stock 2wd

pull the rear block out....would look BA

 

[GCncsuHD]

pull the rear block out....would look BA

There is no rear block. Mine has shackles to drop the rear, but didn't drop it nearly enough, I had spring clamps on it to get it more level but wasn't a fan of the ride.

I'm about to go back to stock in the rear and level the front though.

 

[Josh@DirtyDiesels]

There is no rear block. Mine has shackles to drop the rear, but didn't drop it nearly enough, I had spring clamps on it to get it more level but wasn't a fan of the ride.

I'm about to go back to stock in the rear and level the front though.

Yeah, I was gonna say I didn't think there was a rear block. I really don't want to level it with all the alignment issues. Would rather just keep it all low and wide looking anyways

 

[GCncsuHD]

Yeah, I was gonna say I didn't think there was a rear block. I really don't want to level it with all the alignment issues. Would rather just keep it all low and wide looking anyways

Alignment issues don't look to be too bad, I'll install the leveling pucks, take it and get an alignment readout, figure out which camber bushings I need to order, and do the I-beam grinding when I swap the bushings in, then take it back in to get it fine tuned.

If you are looking into dropping the rear for level, you can get the DJM hanger for the rear for 3", shackles only net 1" by themselves, or 2" when combined with the hanger for a total of 5".

 

[Daddyusmaximus]

Super pumped on this if it works.... gonna try to shove some 33's under a stock 2wd

Digging those wheels and tires on the flat black truck sitting low. You may have to trim the inner fenders, but the way you got it mocked up for the photo, it really has that old school dirt track look to it.

Coolness.

 

[SouthFlstrokin']

Because it's gonna look so BRO with those big tires stuffed in there. Plus leveling these is apparently a nightmare with alignment and all that

Not that bad...

Mine was leveled

Yes 33s fit stock

 

[weazel]

Couple from the other day, the black one is an excursion




Sent from in a ditch up side down and on fire with the wheels still spinning

 

[Crownsville Stroker 7.3]

From last night it's back up and running after a little more than a year

Sent from on the commode with Tapatalk 2

 

[WILD_PHIL]

Couple from the other day, the black one is an excursion
View attachment 20058
View attachment 20059


Sent from in a ditch up side down and on fire with the wheels still spinning

That Excursion is sweet. Real doomsday machine. LOL

 

[weazel]

That Excursion is sweet. Real doomsday machine. LOL

Funny you should say that, we have 4 trucks at the shop (2 of them pictured here) that we say we are setting up for the impending apocalypse


Sent from in a ditch up side down and on fire with the wheels still spinning

 

[WILD_PHIL]

I have always been a fan of Excursions. Especially custom. I seen a 6.4 conversion Excursion for sale in Houston a few years ago. It was a 2010 Harley edition. 40k was the asking price and he would not come down. LOL

 

[moose99psd]

Funny you should say that, we have 4 trucks at the shop (2 of them pictured here) that we say we are setting up for the impending apocalypse


Sent from in a ditch up side down and on fire with the wheels still spinning

That's my plan as well. Flatbed would hold a .50 quite nicely.

Sent from my SCH-I535 using Tapatalk 2

 

[weazel]

Yeah I like excursions too, that one is currently a v10 but it will probably end up with a CAT C-7 or a DT360, my truck is about to get a one off flatbed, and it already has many places for guns


Sent from in a ditch up side down and on fire with the wheels still spinning

 

[SouthFlstrokin']

Yeah I like excursions too, that one is currently a v10 but it will probably end up with a CAT C-7 or a DT360, my truck is about to get a one off flatbed, and it already has many places for guns


Sent from in a ditch up side down and on fire with the wheels still spinning

That's American

 

[weazel]

That's American

I'm a patriot


Sent from in a ditch up side down and on fire with the wheels still spinning

 

[04cr450]

\

Hey guys, new here. Member on the org- I like this place better. Heres a pic of my truck