Search results

Hey guys, finally getting motivation around to getting my truck fixed, just not sure which direction to go with it, it has me at a loss so maybe i should start at the beginning. Originally i was running 175/75 injectors, and they began to get some stiction in them after a couple years and with...

Thinking about adding a 6.7 to the fleet, trying to find one with lower miles at a decent price, ideally I'd like 15-16, but a lot of the better deals for me are 11-14, are 11-14 no go? What should I be watching out for in all years? Are these reliable in higher mileage? TIA Sent from my...

Hey guys i have one i cannot figure out WTF is going on with, basically truck acts like its got some of the typical issues for laggy or now low end boost but everything seems to check out, no uppipe leaks, no boost leaks, good EBP and EBP readings, Good map sensor and line and map sensor...

Selling one of my projects, 2004 f250 bone stock xlt 2wd truck runs good, has a little stiction when cold but otherwise runs like a top, it has 40/20/40 seats decent tires 325k on odo not sure if that's original or not but it doesn't have an ounce of blow by, xlt means power locks and windows...

Picked this up to do a RCSB project and am losing interest for lack of time, i would love to keep going forward but need to focus on other things, on to the truck: 2004 F250 2wd Truck has 324k and change on it with ZERO blow by, im not sure the entire history of this truck other then it was a...

Listing this for a friend, Looking to sell his 2000 f250. 250k miles. The truck runs good. Recently replaced the injectors, new glow plugs,No excessive blowby. Maintenence always on time. It has been great to him, starts just fine in the cold and gets decent mileage, timing is just not right for...

Got myself a head scratcher here, have an 02 7.3 im helping a friend try and diag, its throwing me for a loop, when it was first towed over to my place, it would start but take a min, dump white smoke but it would clear out and seem to run fine, maybe a misfire or two, nothing major. last friday...

Well, the time has come that my 175s need to be gone through, they came from warren and are going back in the next week, talked to them on the phone and they suggested bumping them to 190s with 30% nozzle instead, what differences will i see? are these truly better for me? I have a MTW stage 3...

Anyone interested in a roller? bought this 2004 f350 cab and chassis to do a RCSB build, but found an 05 roller i wanna pick up, just wondering if anyone has interest to pick up this 04 roller, f350 4x4 regular cab with cab and chassis and aft axle tank, power windows and locks cruise etc...

whats everyone torquing their o-ringed heads to? ARPs updated specs with the new lube says 210 and thats what i torqued mine to, was that not enough? should i retorque higher?

Well a month or so back I posted up asking if o ringed heads were mandatory for me, given my mods and future mods we decided to get it done, just finished up the head gaskets 2 weekends ago and got a good test run last weekend, 68mm vgt 175/75s towing at least 15k, didn't do too bad but after...

Well it has come the time that i need to do my gaskets again, i say again as they were done the first time under warranty, no surfacing etc you know how ford warranty is. Now several years later im here again, now mind you im not upset i knew it was a matter of time when you mod them. Now though...

as the title states im looking for a cheap 6.0 single cab, someday i may want to build it up but for right now i need another run around for my shop and think this would be the perfect fit, it can need a little work and i would pref 2wd, what ya got?

Couple years back i wanted to replace my intercooler before i did compounds, never got around to it, was looking at mishimoto as they were priced at 799, thought that was a pretty good buy. here i am 2 years later, didnt do compounds but a 68mm VGT and still playing with fire, well the...

hey guys i have a bunch of icon/dr stuff i need to unload 4.5 hanger system for 99-04 Complete kit minus shocks MSRP $1246. (2) adjustable Pan rod bars for 99-04 MSRP $265. Dual steering stabilizer for 99-04 with shocks MSRP $275. +115.Ea for shocks dual shock mount setup for 99-04 MSRP 173...

alright, where exactly do i begin LOL Lets start with currently. Currently my truck (2006 amarillo edition) is Running an Afe stage 2 intake, MTW stage 3 68mmVGT, 175/75 injectors, Regulated return, Fass 150, Sinister sump, 5" exhaust and tunes from innovative and gearhead. Trans has an...

Going on about 2 weeks now, a friend picked up a 6.4 with spartan tuner, it was in desperate need of updating, after speaking to a couple different people at spartan after he got the (you should know how to do this off the website attitude) etc he finally got it updated, tried to upload and it...

Hey guys, friend is picking up a 2008 6.4 with 80k on it on monday, getting it for a good deal... however the truck has some known issues, pricing out worse case scenario even if he had to pay 8k for new engine installed hes still coming way out ahead. heres where my questions come in, being a...

Trying to get ahead of the game a little bit, im getting another trans that i want to build while i still be kinda nice to my stocker. My question is what all needs to go into a 5r110 that will hold 650hp or so, i plan on that being the cap as that seems to be the number that the rods are...

anyone on here installed a 6.7 pump on a 6.0?