6.4 crank no start. Mpd s472 amd code p0232

[ramonpowerstroker]

Got p0193 code. FML and this s472 don't spool for ****! Lmao

 

[Dzchey21]

193 is low boost right.

Sent from my SCH-I545 using Tapatalk 2

 

[ramonpowerstroker]

No fuel pressure sensor, but I fixed it... got a exhaust leak..... lol but at 3k can't even see 10 psi lol!!! This trucks a head turner though....


But back to motor works, the blow by.... its able to push the cap around when loose...

 

[Dzchey21]

Where is the exhaust leak?

I would say the blow by is excessive might also be the spool issue

Sent from my SCH-I545 using Tapatalk 2

 

[ramonpowerstroker]

What do you mean the issue? I have 6.0 manifolds And pipes where they connect is where its leaking.. . I'm also 2500ft above sealevel

 

[Dzchey21]

If you have low compression that will make it hard to spool. ..

2500 feet should be just fine.

Get the leaks fixed and let us know

Sent from my SCH-I545 using Tapatalk 2

 

[ramonpowerstroker]

Alright.... but how how compression? Pistons were I great shape, and truck runs great... idk we'll see

 

[pog]

Over view of build? Fuel? Tuning?

 

[ramonpowerstroker]

Usual.... ARP, ported intake, 6.0 manifolds,MDP s472 turbo, stock fuel, valvetrain pushrods 139000 miles

 

[pog]

Who's tuning? .90 ar?

 

[ramonpowerstroker]

Hd300 and yes

 

[ramonpowerstroker]

H&s HD 300 and yes the .90 exhaust

 

[Dzchey21]

Pistons can look fine but you have low compression due to the lack of cross hatch in the cylinders. Thats what blowby is lack of cylinder compression.

I hope its not that but based on what youve said so far you have something going on

Sent from my SCH-I545 using Tapatalk 2

 

[ramonpowerstroker]

Dam... would be ashamed if I just spent 6k on a piece of ****... these got to be something I can do to see... remember its just enough to make the cap blow slightly off... its not thrown like when you cut off the ccv flow..

 

[jdgleason]

I would do a manual compression test man. Get that confirmed one way or another.

 

[ramonpowerstroker]

Where can I get a compression test.... looks like the exhaust leak wasnt the problem.

 

[ramonpowerstroker]

I'll have videos soon... YouTube doesn't work for some reason.... I'll use photobucket

 

[jdgleason]

Are you looking for the tester or a shop to test it? Should be able to get the tester from just about any auto parts store.

http://www.youtube.com/watch?v=jFX3M-B1hxw

 

[ramonpowerstroker]

Cabs on the truck though.... how am I suspose to do it that way?

 

[SEABEE08FX4]

You bleed the air out from the Fuel Cooler, it's easy I made my own kit.