Search results

Anyone ever swapped their fuel bowel? Need help on disconnecting the fuel line to the tube, was told there was a nut on the bottom but I do not see it

I bought the billet fuel and oil filter caps and installed in july when last service was done. Today during my service the oil came off no problem, then did the fuel, it was coming undone for a bit then stopped. Used a pull bar, pipe, filter ratchet strap (which made an indention from pulling...

Anyone else using these? I just received them today and the fit seems way off in some places. Any help would be appreciated

Clear chrome aftermarket led headlights,has the wiring for the led and angel eyes around lights.This light uses a H1 bulb, they have no scratches cracks and no moisture in them,very nice looking lights just changing the appearance of my truck. Had trouble uploading pic on phone,can post one tom...

Looking for the edge or edge style mount for the Spartan programmer

Anyone looking to go to chrome from black wheels, I have 4 dale jr ribelle 20x9 chrome wheels with 33x12.50x20 toyo mt with about half the tread left. Would like to go to the kmc xd 775 20 or maybe 22s, looking to trade and or maybe some cash based on value

http://norfolk.craigslist.org/cto/3218317497.html

Alright I've these headlights for a while, they use a h1 bulb and they suck. Is there a way to pop all that stuff out and put stock bulbs in. This light kit uses a h1 for high and low beam. They are also hard to adjust, not sure if you guys have trouble with adjusting lights as well?

I noticed it yesterday and this morning, while accelerating from a stop light it acted like it did in re-gen. Truck felt sluggish and noticed a white smoke, let off of it then it was fine. Everything is deleted, so any ideas?

Alright well i've been getting some shaking between 40 and 50 mph, I figured it was u joints, so what u joints have you guys gone with and do you get the shaft aligned? Also I just replaced the front brakes last march,lately i've noticed when I come to a stop as the truck as almost at a stop I...

Well I was checking to see if there were grease fittings on my new ball joints, saw lower ones but not upper. But on the passenger side, the rubber seal that goes into the axel from the ball joint area is lose, not sure if anyone quite knows what im talking about, having trouble uploading photo...

Alright well I noticed two spots in the driveway and looked under to see that there was oil on top of the pan and all down the sides,its a slow leak it seems. I just had my egr delete with wastegate installed tues,they removed the cab. I don't recall a leak before,could this be a result of...

This is a 2010 model bought in may of 2010. 31hp Kawasaki engine, 60" cut. Was used for residential mowing only, only operated by me, all service intervals complete, only ever ran 93 octane in it.currently has 125 hours on it, also has the ROPS. Having trouble uploading pictures, but if...

Storms in Virginia last night resulted in major hail damage to my 08 f250. Looking for anyone who may have an in tact hood for sale. Insurance company will look at the truck in the morning, hating that body filler is going to be on my truck now

Looking for 08 harley lights or nice make of another,I have aftermarket chrome ones now that do not adjust well and are using an h1 bulb,trying to mainly get away from the h1 bulb,thanks!

Was looking to remove it and coolers, add cfm and ic pipes. My question is is a wastegate needed and can I do this cab on? I'm no mechanic but not my first wrench turned. Thanks in advance!

Alright guys trying to get some input on this. My truck is at the shop and am going to get the egr out of there.With so many kits im not sure where to start, by looks it seems Rudys kit with the wastegate and cfm may be best? Also it seems I can get a deal on a custom set of 6.0 up pipes and...

I have noticed before at idle a tick, like a exhaust tick after someone cuts their vehicle off. And tonight while leaving the driveway I could hear it more predominantly, it sounds like its on the drivers side. Any ideas? Also I had another thread stating this but ive been having other problems...

Have codes p2263 and p2563 and called a shop today to get some input and schedule an appointment. They said by the sound of it and with the codes it could need new turbos. What do you guys think?

While at idle the motor will rumble loud and the exhaust gets deeper and you can hear the winding down of the turbo out the exhaust. I have also heard it once while in operation. Hopefully someone out there can help or relate to the cause. Thanks