Search results

I have a brand new 3" 2 piece diamond eye DP for obs 7.3's looking to get $80 + shipping for it. I bought a 3" dp a while ago and finally ordered a full kit that included dp so I don't need this one.

I am wanting to go with irate's T4 S468 kit but my question is, can I cut & use a set of SD intercooler pipes or will those be too small diameter for the 468?

I am just looking to level my f250, I don't want to lift at all. Will an add-a-leaf have the same negative effects as an actual lift kit? Will I have to do anything to the rear to get it level? Any input is appreciated.

Does anyone have pictures of the Fuel Throttles in a 20" on their obs? I am looking at a set and i don't know how they would look on an obs & can't find any pictures!

I am getting tired of seeing my front tires when looking from the back of my truck! What is the best way to space out the rear tires on an f250? Also, is it possible to take out the lift blocks in the spring pack to make it sit level from front to back with no negative effects? I am stuck with...

I have the opportunity to get my hands on an e99 7.3. I would like it to build it up while I drive my truck around. Now, when the time comes would I be able to swap the e99 into my obs and run it off the obs PCM? I have stage 1's that I would swap over & efuel. Any thoughts/comments are appreciated!

Will an HPx help prolong the life of injectors if I install a T500? I am not looking for any performance gains from the crossover, just to help the injectors towards the rear last longer

1995 f250, went to start it today all I heard was clicks. The volt gauge has a huge draw on it. Tried to jump it, let it sit for while charging, still clicking. Would the starter pull a huge draw if it's no good? Also smelled something a little burnt in the cab. Haven't checked fuses or really...

Truck is a 1997 7.3 auto. All stock. It is leaking fuel fairly badly out of the sensor on the pressure regulator on the bowl. Here is a picture for reference My question is, what is this sensor? As it's not on my 1995 manual & can I just install a plug and forget about it? It is leaking near...

On my brothers 1997, the OBD II port is not working, the cigar lighter in the slide out isn't working neither (I remember reading about that). Where should I start? Only info I can find is fuse #3 in the super duty forums. That fuse is fine (looking at it, haven't tested). Any info is greatly...

http://www.dieselsite.com/wickedwheelforthe2011-2013ford67l.aspx

Currently my truck has stage 1's, 6pos and efuel. Plans are for a T500 & possibly a d66. But my question is, would it be worth it to pull the stock, put a 1.0 housing & ww2 on it and call it good? I have also seen people putting a 1.0 housing on the d66 and seeing good results. Should I wait...

97 f250 won't stop squeaking & has only gotten worse. All the pulleys seem ok. The vacuum pump feels really seized up but still spins(with a lot of force). Whenever I spray water on to the belt between the fan hub & power steering pulley on the splined side, the squeak will go away. Is it...

Where do I install the oil pressure safety switch? I have the efuel setup from bean's & in their instructions it shows the spot for the switch is right by the oil filter. But there are 2 plugs where it looks to be in the instructions. So which one is it? They both seem really tight & i don't...

My brother's tensioner pulley is real loose on his 1997 f250 I am just wondering where to get a solid replacement? I would like to get OEM but ford wants $165 for it. Any suggestions are welcome! Thank you.

So the previous owner probably hadn't changed the glow plugs in my brother's truck for about 10 years or so... I am going to be changing them out this week. What are some precautions I can take on these plugs so they don't snap off in the head?

Welp, mech pump is leaking... Considering doing efuel from beans diesel! Just have some questions: how long SHOULD the install take? I still have to get to work! Haha. I have stage 1's on a stock hpop as well, should I upgrade? Would a T500 be sufficient? If I go efuel, should I do a bowl...

Hey everyone! My brothers 97 PSD has a belt squeak & we replaced the belt but it is still squeaking so we checked out all the pulleys & it looks like the vibration dampener has a wobble to it... This just started happening. What could be the cause of this? What is the process to replace them...

So I was removing the fuel pump from the valley & the WHOLE plunger came out of the pump and dropped in the hole... I don't have the means to pull the engine and replace pan gasket. Is there an easier way to replace the gasket? I need to make sure that the plunger is in the pan, how do I go...

There is a pretty significant leak in the valley of the truck I am looking at. What are some common leak areas around there? Is it one of the line at the back of the head? I only got a chance to look at it during the night. Going to look at it during the day tomorrow. This truck ran good & is...