Search results

Got a buddies cube van with a 6.9L. Will only start while plugged in for about 30 mins and longer. Replaced glowplugs, direct wired in a switch to control the glow plugs. 12V at the glow plugs, 12V on both large posts on the GPR while the glow plug button is pressed. Glow plug controller...

I am at the end of my patience with this issue. My truck died on me a few weeks ago cooking the IDM. I had noticed a "dead spot" at around 2400-2600 rpm. It feels like a rev limiter or a top speed governor cutting out the fuel. The truck died and didn't start up again until I replaced the IDM. I...

Looking for a PCM for a 97 F250 manual trans.

1997 F250 HD 4X4 5 Speed Electric Fuel, Tony Wildman 6 pos chip On the way home from work today which is a 20 min highway drive t\he truck started to sputter and cough with a loss of power. I was intending on filling up because I was low on fuel and luckily there was a filling station nearby so...

So after many years of teasing and ridicule I have finally purchased a Dana 60 for the front end of my 97 F250. Since I am a heavy duty diesel mechanic I have all the tools of the trade and equipment to make this a relatively smooth swap but I have a few questions before going any further. The...

I have been having an issue with what I can only describe as a front end steering and suspension death wobble. The problem started about a year ago and has gotten more and more frequent until now when it does it all the time. The first time it happened I thought I had a flat tire because the...

Recently I blew a fuse in spot no.4 in the fuse box in the cab of my 97 OBS F250. It killed all my exterior running lights and also all the instrument panel lights on the inside. The headlights, turn and brake lights all still worked but none of the running lights including the tail lights. I...

I found a deal I don't wanna miss out on. A Dana 60 with driveshaft for $300 but it's for coil springs not leafs. It is from a 2007 F250 4X4 obviously but it's going under a 97 F250 . Can i use this axle with leafs? How do I convert it if it needs to be converted at all? Need some info please.

I am looking for a lift kit for a 97 OBS F250 4X4. It has a TTB front axle. I am lookin for at least 4" of lift. 6" would be nice. I cannot afford nor find a Dana 60 so although it would be the better way to go it's not gonna happen anytime soon. Shipped to R3n 1P4. Winnipeg Canada.

Does anyone know if I can change the steering wheel to a newer model. I have a 97 F250 xl and I want to switch it up a little. I am customizing my interior and want to know if I can update it a little. It has cruise control buttons on the steering wheel so I'd need the same sort of layout.

I had recently ordered some gauges through my parts department at work and did not receive what I ordered. I originally ordered ISSPRO Ev2 White face blue pointer chrome bezel boost and Pyro guages with the sending unit/probe and boost tube kit. What showed up was ISSPRO but they were not EV2...

I have now learned my lesson. Don't do a half assed job or jerry rig it. I had recently put together my electric fuel system and am now having to repair it every weekend since. Foolishly I used rubber fuel lines in the valley with hose clamps and barb fittings. Now I see the error in my ways. I...

Been hearing some squealing lately out of the front end of my truck. Jacked it up and found the wheel/axle bearings are loose. Or rather the hubs were loose. May even have been that way since I did the U-joints in the front axles. It's been a long time since I did that so I'm wondering if the...

Will a ZF42(ZF5) from a 91 work for my 97 with the single mass clutch and flywheel upgrade? 4X4

Anyone know where the wires for the fuel heater originate? I switched to E-fuel but I guess I left the wire for the fuel heater hanging there and it shorted out the 30amp fuse thus killing the power to my ICM. luckily I've had this issue before so I knew the symptoms and which fuse to check. I'm...

Since I had my clutch done the cruise control hasn't worked. Where is the sensor on the transmission? Or am I looking for something else? The neutral safety switch works so I know it's not that. Another issue since I got the clutch done is that the 4X4 lights don't show up. I know the transfer...

The title says it all. I am looking for a 17* HPOP from a super duty 02ish. Shipped to R3N 1P4. Going into an OBS 97 F250

I have recently converted to electric fuel and have the old mechanical fuel pump and filter bowl that I want to get rid of. I don't wanna toss em because someone could use them. The fuel heater is shot but the bowl is good. I replaced the o-rings in the bowl as well as the FPR. FPR also has been...

I'm hoping there are a whole bunch of Canadians on this site. Most guys on here are from the US so this is a shout out to all the Canucks. Would be nice to have a get together sometime but this country is so spread out. Hopefully one day we could find a middle ground.

I am having a real hard time finding a 7/8 Frost plug at any auto parts storesin town. Nobody has em so I am looking for an alternative to the frost plug. Anyone ever covered the Fuel pump tappet hole with a plate? Custom or otherwise?