Search results

  1. Baker42

    Please help figure out why I keep going through diodes

    Had an issue with mine. Turned out to be a bad starter
  2. Baker42

    Autometer HPOP gauge reads false when chip is on

    I have been busy Dave been out of town for work the past few weeks so I haven't had a chance to check my replies. I have installed several chips on several trucks. Kind of hard to fu** THAT UP. either it works or doesn't, thats been my experience. And I just towed my 5th wheel,12000lbs and my...
  3. Baker42

    Need a new turbo

    I installed a t4 mount and Borg Warner's new S364.5 sxe on mine. I used to pull my 5th wheel about 12000 lbs, and was constantly looking at the pyro and downshifting to fourth gear to lower exhaust temps. After this turbo I never have to drop a gear, and I don't even need a pyro anymore. It...
  4. Baker42

    Let's talk hitches

    Bingo. You don't see any over the road semi trucks pulling anything off their bumper.
  5. Baker42

    Autometer HPOP gauge reads false when chip is on

    There are no tuners on this site that might help point me i the right direction? Crickets chirping.....
  6. Baker42

    Autometer HPOP gauge reads false when chip is on

    It did it with my old DP F5 as well. I set it back to Jody, and all tunes were limited to 3200 psi. According to Power Hungry, none of their tunes call for over 3200 psi.
  7. Baker42

    Autometer HPOP gauge reads false when chip is on

    Hydra with Power hungry tunes.
  8. Baker42

    the new guy

    Welcome. Hope it holds up for you after that
  9. Baker42

    1996 7.3 cranks hard but won't start

    Check the 30 amp fuse under the hood. if its popped the fuel heater most likely shorted out.
  10. Baker42

    Autometer HPOP gauge reads false when chip is on

    I have 7.3 with a HPOP gauge. It reads fine with the chip on the stock tune. When I turn the chip on it is showing 4000 P.S.I.! I talked with the tuner and they said none of their tunes command more than 3200 P.S.I. I do believe them which leads me to believe that the ICP sensor is giving false...
  11. Baker42

    Front axle re-build kit?

    Moog
  12. Baker42

    Better HPOP

    Ive had my Adrenaline on since 90,000 miles. 228,000 and 0 problems at 3200 psi WOT.
  13. Baker42

    core support bushing picture??

    The bottom is just the bushing (steel incorporated, small bushing. Threads through large tapped bushing. BTW the LMC and Ford bushings are EXACTLY the same part made in the same plant, IE- the same-Thailand. Thank you Clinton.......s
  14. Baker42

    Industrial Single Turbo

    Im in NM and tow often, thats why I sent the 369SXE back for the 364.5. After hearing your testimony, I'm glad I did. Bigger is not always better.
  15. Baker42

    core support bushing picture??

    Just replaced my rad support. Oval slotted washer up top. Bolt goes up through bottom bushing and threads into large bushing. Large bushing is a hexagon and faces down to frame 'hexagon'. Large fender washer on top of upper bushing between rad support. Lastly small fender washer on top of...
  16. Baker42

    Just a few questions

    I was going to buy Swamps 205/30's. After talking to golfer I decided to do the turbo 1st. I run a BW 364.5 SXE. Plenty for our trucks as a DD/tow rig. Do the T4 mount, turbo, intercooler, efuel, 1st. Then injectors. Just my $.02
  17. Baker42

    OBS no start

    How the hell does the LPOP just go out?
  18. Baker42

    OBS 97 7.3 4x4 cc auto injector size?

    364.5 SXE and 160/80's
  19. Baker42

    Towing Question

    As Mike says,Just do it.
  20. Baker42

    Best tire option

    Well thats all I needed to hear. I was going to try those new patriot tires. Guess I will give the ATZ's a run.

Latest posts

Members online

Top