Search results

I've read that there is an oil supply filter in the turbo pedestal. Is this a maintenance item? Where exactly is it? I've searched and can't find much. We have a 19 F450 that has lost a turbo at 130k miles and 8100 hrs.

I am wanting to change my cluster to the OneGauge digital gauge solution - https://www.theonegauge.com/product/ford-f150-bronco-full-size-truck-92-96/ Can this be done? I know I would need a stand alone controller for the trans but doesn't the ECM require communications with the cluster?

So the pinion nut on the rear axle backed out of one of our 2019 F450s. Truck has 97k miles with an extended warranty, 6000 engine hours / 150k miles but the truck has 6078 hours on the engine and Ford will not help, plus they are experiencing extreme backorders. We sourced an axle out of a...

I have a 2019 450 that will not drain the water separator tank to empty so that the filter / separator can be replaced. When I open the water drain fuel drains continuously. I've tried with a 1/4 tank of fuel and a full tank of fuel but no matter how long the water drain valve is open fuel...

I have a 2001 7.3 w/ manual trans in the shop that needs an engine main harness. The customer brought a harness but it is for an automatic truck, it is missing one plug, temp sensor above the CPS. The harness for manual trucks has been discontinued by Ford. can this harness be made to work...

Trying to get a definitive answer on which socket these axles require. If my research is correct this is the Dana M300 11.8". Does anyone know what socket is required to remove the spindle nut?

We ordered a couple 19 450s and chose the tow package which for some reason does not include the integrated brake controller. What will be required to install and get up and working? We do not want aftermarket

My dad bought this truck new and I bought it from him in 2010 with 107k. No rust, no wrecks though I did have a right front tire blow causing the fender to have to be repainted. Interior is in good shape and overall a very good truck. The tailgate needs some work You can see from my sig what...

A friend of mine has an early '99 (7/98) 7.3 with 310k miles. He bought it with about 280k miles and no known service history. He has always had a hard starting issue and now the truck is running rough, like it is missing. The missing started about 4 months ago and he had it towed to a shop...

Just installed my B&W Gooseneck and have my Companion, now starting to look for a camper.Trying to figure out how much I can tow. I see with 4.10s capacity goes up significantly, I am open to going to 4.10s. What can these trucks tow in the 5th wheel configuration with 3.55s? With 4.10s?

My oil cooler needs to be resealed, when it turned off cool last fall it put some coolant on the ground and every once in a while I get a whiff of coolant. The truck is also due for an oil change and coolant change. While I am doing the reseal, coolant flush and oil change I figure this would...

I was getting Schaeffer's 7000 from a local Rep that treated me very right, less than $100 for a case of 6 gallons. He would mix my order in with other's so that we could obtain free shipping. Since my last order he has moved out of state and is no longer servicing our area. The new Rep in the...

Changing the gear oil in the rear axle which has a factory limited slip unit. I am using Valvoline synthetic 75w-140 ( http://www.autozone.com/autozone/accessories/Valvoline-Full-synthetic-gear-oil/_/N-255s?itemIdentifier=977483) which states "Limited Slip" on the bottle. So is a friction...

A friend of mine has a 99 SD. The A/C works great until he tows his 5th wheel camper, about 7k lbs. It only takes about 15 minutes of towing and then the A/C blows hot. We have taken a 2 hour trip empty and the A/C works flawlessly. An A/C shop checked the system out and said everything was...

Had a conversation with Brian at BTS earlier this week and he mentioned it was probably a good idea to do injector o-rings due to age, truck has 131k miles. What are some signs of needing o-rings? I have had several oil analysis done and nothing has been noted.

Just got back from a short interstate trip (310 miles) with about 50 miles of in town driving and a little stop and go coming through Atlanta. I got 18.1 mpg out on the road running 74 mph (2000 RPMs). Which I am happy with. What I am not happy with is my in town mileage. While it is not...

I'd really like a set of Full Force 160/100 but am open to other brand stage 2s. Have cash and am ready to buy new just figured I'd check to see if anyone has a good used set.

I've been saving for injectors anticipating doing FF 160/100 and am almost there, within $50. Made some calls to various vendors Friday and based on my mods and the truck's use I had about a 50 / 50 split of them telling me to go to a stage 1 (160/stock) or a stage 2 (160/nozzle). On Monday...

I figure I would post this question here as it may benefit others. Purchased the 5/16" quick connect to #6 AN adapter fitting found here; http://www.strictlydiesel.com/p-2739-516-quick-disconnect-to-6-an-adapter-fitting.aspx Great product and fits good and snug. Question is, how are these...

Just wanted to drop a note and say how pleased I am with the service you all give. I've ordered several times from you all and even being on the opposite side of the Nation I get my parts quickly and the order is always complete. I just wish my local dealer would come off the retail price so I...